KEY-BAK

Filter by

Sort by

The ToolMate Smartphone Jacket and Jacket XL has been designed to fit any cell phone and it’s case while tethered to a retractable tool lanyard. The Jacket allows for full function of touch screens, forward/rear facing cameras and fingerprint readers.

ToolMate Smart Phone Jacket with Retractable Tool Lanyard Combo

Retractable Tool Tether with Removable Universal Wire Loop

Retractable Tool Tether with Removable Universal Wire Loop

Keep the things you use most often - like pens, markers, and pencils -- handy and ready to use. JobTackle Retractable Pen and Marker pulls are built in the USA with globally sourced materials-with rugged, high strength, and corrosion-resistant materials. Small but mighty, JobTackle Retractable Pen and Marker Pull have been tested in excess of 1,000,000 pulls.

JobTackle Tool Tether for Pens and Markers

Nickel-plated, tempered, 1-1/8" (2.9 cm) split ring end Genuine leather strap attaches to belt Bolt snap for easy removal Clips to belt loop or purse strap

Bolt Snap Key Ring with Detachable Leather Strap

Prevent Harm to those below you with the KEY-BAK Pro 3 lb. Retractable Tool Lanyard and “STOP THE DROPS”. Designed for Dropped Object Prevention confidently tether tools up to 3 lbs. to you, your harness, ladder, lift or the structure so an accidental dropped tool doesn’t injure a friend, coworker or teammate.

ToolMate Retractor 3lb

Tool Lanyard 15lb Carabiner to Carabiner

Tool Lanyard 15lb Carabiner to Carabiner

The ToolMate Smartphone Jacket and Jacket XL has been designed to fit any cell phone and it’s case while tethered to a retractable tool lanyard. The Jacket allows for full function of touch screens, forward/rear facing cameras and fingerprint readers.

Smartphone Jacket for Key Bak Tool Tether

Keep your eyes on the road and your CB MIC handy with the JobTackle Tool Tether for CB Radios. Never drop your mic on the floor again and eliminate the sloppy swing of bungee cords, or the need to re-hang the mic on its holster. The built-in RATCH-IT™ lock system locks the reel at the desired length for maximum safety and convenience. A second pull releases the reel and retracts the CB MIC back to a safe driving position.

JobTackle Retractable Tether with Ratchet Locking Lanyard

The USA Made JobTackle Tool Tether for Electronics keeps electronics such as rangefinders, GPS units, phones and more secure and handy so you can get the job done. The JobTackle Tool Tether for Electronics features lock to stop retraction that removes tension from cord. The polycarbonate case with stainless steel retraction spring is built to withstand the elements of the outdoors.

Tool Tether with Switch Lock and Removable Electronics Tool

ToolMate Tool Attachment Tape Roll activates and bonds as you stretch it. Use with ToolMate Link Strap, Link Strap Loop and Link Cord Loop to instantly tether your existing tool. ToolMate Tool Attachment Tape Roll has been 3rd Party Dynamic Drop Tested with KEY-BAK Pro tool lanyards and tool attachments. Proven with 2:1 safety factor when used as instructed. CAUTION: Tested and proven for use with KEY-BAK Pro Tool Lanyards only Use in dry conditions only

10' Tool Attachment Tape

Tool Lanyard 15lb Carabiner to Strap Loop

Tool Lanyard 15lb Carabiner to Strap Loop

Prevent Harm to Those Below You. No one wants to injure a friend or coworker because they dropped a tool. Protect them and protect your investments by securing your hammer drills, angle grinders, pipe wrenches, and other heavy tools up to 10 lbs with ToolMate Heavy Tool Lanyards.

Tool Lanyard 10lb Carabiner to Strap Loop

Prevent Harm to Those Below You. No one wants to injure a friend or coworker because they dropped a tool. Protect them and protect your investments by securing your hammer drills, angle grinders, pipe wrenches, and other heavy tools up to 10 lbs with ToolMate Heavy Tool Lanyards.

Tool Lanyard 10lb Carabiner to Carabiner

Don’t Replace Your Proven Tools, Upgrade Them Tether Ready. Many professional tradesmen and companies have tools that have been getting the job done for years. Often, these tools were made before the DOP Movement and do not have captive eyes, factory installed D-Rings, or other tool tethering attachments. Instead of retiring your proven tools, use a ToolMate Link tool attachment to make them tethering ready.

ToolMate 5 LB. Strap with Cord Loop and D-Ring (3-Pack)

Don’t Replace Your Proven Tools, Upgrade Them Tether Ready. Many professional tradesmen and companies have tools that have been getting the job done for years. Often, these tools were made before the DOP Movement and do not have captive eyes, factory installed D-Rings, or other tool tethering attachments. Instead of retiring your proven tools, use a ToolMate Tool Attachment to make them tethering ready.

ToolMate 5 LB. Link Strap Loop (3-Pack)

Don’t Replace Your Proven Tools, Upgrade Them Tether Ready. Many professional tradesmen and companies have tools that have been getting the job done for years. Often, these tools were made before the DOP Movement and do not have captive eyes, factory installed D-Rings, or other tool tethering attachments. Instead of retiring your proven tools, use a ToolMate Tool Attachment Strap to make them tethering ready.

5 LB ToolMate Link Strap (3-Pack)

Don’t replace your proven tools, upgrade them tether ready. Many professional tradesmen and companies have tools that have been getting the job done for years. Often, these tools were made before the DOP Movement and do not have captive eyes, factory installed D-Rings, or other tool tethering attachments. Instead of retiring your proven tools, use a ToolMate Tool Attachment Strap to make them tethering ready.

3 LB ToolMate Link Strap (3-Pack)

The JobTackle I.D. Badge Reel & Key Holder attaches to your safety vest or work wear to ensure they don't leave their keys at home or lose them on the job site but still easy to use. The durable polycarbonate case makes the JobTackle I.D. Badge Reel & Key Holder super strong, yet very light. The zinc alloy carabiner conveniently clips to safety vests, work wear or onto belt loops, keeping the JobTackle I.D. Badge Reel & Key Holder always accessible, yet secure.

Jobtackle I.D. Badge Reel & Key Holder

The JT48 features an ambidextrous ball-joint lock so the reel can be used on either hip, a larger belt clip speciﬁcally designed to accommodate 2-1/4” Duty Belts and an integrated belt clip lock that easily converts the clip to a belt loop - no pin required.

Jobtackle JT48 Locking Heavy Duty Retractable Tool Tether With Heavy Duty Belt Clip And Split Ring Hand Tools Attachment

Chrome-plated zinc, premium quick-release key holder Detaches separates into two sets of keys Nickel-plated tempered steel 1" split-rings Cylindrical shape

Round Pull-Apart Key Ring

1 2 →

Working at Height made simple

Looking for something by this brand you don't see here?
Send us an email at contact@concertshop.store